Are you interested in successfully completing the Microsoft 70-687 certification then start to earning the high salary ? Lead2pass has leading edge developed test questions that will ensure you pass your exams!

QUESTION 161
You have a computer that runs Windows 8.1. IPv6 is disabled on the computer.
The computer has the following IPv4 settings:
– IP address: 10.1.1.193
– Subnet mask: 255.255.0.0
– Default gateway: 10.1.1.194
– Preferred DNS server: 10.1.1.195
You need to ensure that the computer can only communicate with computers on the local subnet. What should you do?

A.    Delete the default gateway address.
B.    Delete the preferred DNS server IP address.
C.    Configure the subnet mask to use 255.255.255.0.
D.    Configure the subnet mask to use 255.255.255.192.

Answer: A

QUESTION 162
To establish a DirectAccess connection to the network, what is the first requirement?

A.    A certificate
B.    A VPN connection
C.    A static IPv4 address
D.    A static IPv6 address

Answer: D

QUESTION 163
You have a computer named Computer1 that runs Windows 8.1.
You have a server named Server1 that runs Windows Server 2008. Computer1 and Server1 have IPv4 and IPv6 installed. You need to identify whether you can connect to Server1 by using IPv6. What should you do?

A.    Run Ping Server1 -6.
B.    Run Ping Server1 -n 6.
C.    Run Net view \\Server1.
D.    Open \\server1 from the Run dialog box.

Answer: A

QUESTION 164
A company is setting up a new branch office.
You deploy 10 new Windows 8.1 64-bit client computers in the branch office.
The computers cannot connect to the Internet.
You run the ipconfig command on one computer.
The following output depicts a portion of the results.

wps4A52.tmp_thumb[2]

You need to ensure that the computers can connect to the Internet.
What should you do?

A.    Deploy a Dynamic Host Configuration Protocol (DHCP) server.
Configure all computers to use DHCP.
B.    Deploy an Internet Information Services (IIS) server.
Configure all computers to use IIS.
C.    Deploy a Domain Name System (DNS) server.
Configure all computers to use DNS.
D.    Deploy a Windows Internet Name Service (WINS) server.
Configure all computers to use WINS.

Answer: A
Explanation:
http://packetlife.net/blog/2008/sep/24/169-254-0-0-addresses-explained/
169.254.0.0/16 addresses explained
Occasionally you may encounter a host which has somehow assigned itself an IP address in the 169.254.0.0/16 range. This is a particularly common symptom of Windows machines which have been configured for DHCP but for whatever reason are unable to contact a DHCP server. When a host fails to dynamically acquire an address, it can optionally assign itself a link-local IPv4 address in accordance with RFC 3927. Microsoft’s term for this is Automatic Private Internet Protocol Addressing (APIPA).

QUESTION 165
A company has an Active Directory Domain Services (AD DS) domain.
All client computers are joined to the domain and run Window 8.1.
You set up a management computer named COMPUTER1.
You plan to administer COMPUTER1 by using Windows Remote Shell (WinRS) from your client computer.
You are unable to connect to COMPUTER1 by running the winrs command.
You need to ensure that you can manage only COMPUTER1 by using WinRS.
What should you do?

A.    Run the winrs netdom join command on all client computers.
B.    Run the winrs netdom join command only on COMPUTER1.
C.    Run the winrm quickconfig command on all client computers.
D.    Run the winrm quickconfig command only on COMPUTER1.
E.    Run the winrs /ad /u:administrator command on COMPUTER1.

Answer: D

QUESTION 166
You administer Windows 8.1 client computers in your company network.
A user reports that her Internet connection is slower than usual.
You need to identify the Process Identifiers (PIDs) of applications that are making connections to the Internet.
Which command should you run?

A.    netstat -an
B.    jpconfig /showclassid
C.    netstat -o
D.    netsh set audit-logging
E.    netsh show netdlls

Answer: C
Explanation:
http://technet.microsoft.com/en-us/library/bb490947.aspx
Netstat
Displays active TCP connections, ports on which the computer is listening, Ethernet statistics, the IP routing table, IPv4 statistics (for the IP, ICMP, TCP, and UDP protocols), and IPv6 statistics (for the IPv6, ICMPv6, TCP over IPv6, and UDP over IPv6 protocols). Used without parameters, netstat displays active TCP connections.
Syntax
netstat [-a] [-e] [-n] [-o] [-p Protocol] [-r] [-s] [Interval]
Parameters
-a : Displays all active TCP connections and the TCP and UDP ports on which the computer is listening.
-n : Displays active TCP connections, however, addresses and port numbers are expressed numerically and no attempt is made to determine names. -o : Displays active TCP connections and includes the process ID (PID) for each connection. You can find the application based on the PID on the Processes tab in Windows Task Manager. This parameter can be combined with -a, -n, and -p.

QUESTION 167
You administer Windows 8.1 computers in your company network.
You need to configure remote computers to receive Windows Remote Shell commands.
Which cmdlet should you run on the remote computers?

A.    Enable-PSRemoting
B.    Set-PSSessionConfiguration
C.    New-PSSession
D.    Set-NetConnectionProfile

Answer: A
Explanation:
The Enable-PSRemoting cmdlet configures the computer to receive Windows PowerShell remote commands that are sent by using the WS-Management technology.
http://technet.microsoft.com/en-us/library/hh849694.aspx
Enable-PSRemoting
The Enable-PSRemoting cmdlet configures the computer to receive Windows PowerShell remote commands that are sent by using the WS-Management technology.
On Windows ServerĀ® 2012, Windows PowerShell remoting is enabled by default. You can use Enable-PSRemoting to enable Windows PowerShell remoting on other supported versions of Windows and to re-enable remoting on Windows Server 2012 if it becomes disabled.
You need to run this command only once on each computer that will receive commands. You do not need to run it on computers that only send commands. Because the configuration activates listeners, it is prudent to run it only where it is needed.

QUESTION 168
You administer Windows 8.1 Pro computers in your company network.
A user reports that her computer experiences frequent STOP errors.
You need to repair the Windows 8.1 installation.
Your solution must ensure that the user retains her current documents and settings.
What should you do?

A.    Create a recovery drive.
B.    Reinstall Windows 8. Restore the user’s personal files from a backup.
C.    Run Reset your PC.
D.    Run Refresh your PC.

Answer: D
Explanation:
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
How to refresh, reset, or restore your PC
If you’re having problems with your PC, you can try to refresh, reset, or restore it. Refreshing your PC reinstalls Windows and keeps your personal files and settings. It also keeps the apps that came with your PC and the apps you installed from the Windows Store. Resetting your PC reinstalls Windows but deletes your files, settings, and apps — except for the apps that came with your PC. Restoring your PC is a way to undo recent system changes you’ve made.

QUESTION 169
You administer a Windows 8.1 Pro client computer.
You disable system protection, install custom drivers, and create a system image.
You test a new application and discover that the computer becomes unresponsive.
You need to return your computer to the state that existed prior to the installation of the application.
What should you do?

A.    Start the computer from a system recovery drive, and then perform System Restore.
B.    Start the computer from a system repair disk, and then perform System Image Recovery.
C.    Start the computer from the system repair disk, and then from the command prompt, run the BCDEdit /copy command.
D.    Run Reset your PC.

Answer: B
Explanation:
If you can’t access Control Panel and you don’t have a Windows installation disc or a system repair disc, use this method to restore your computer:
Restart your computer using the computer’s power button.
Do one of the following:
On the Advanced Boot Options screen, use the arrow keys to highlight Repair your computer, and then press Enter.
Select a keyboard layout, and then click Next.
Select a user name, type the password, and then click OK. On the System Recovery Options menu, click System Image Recovery, and then follow the instructions.

QUESTION 170
A company has Windows 8.1 client computers. Users store data files in their user profile libraries.
You need to ensure that you can restore data files to any date while minimizing system overhead.
Which two actions should you perform? (Each answer presents part of the solution.
Choose two.)

A.    Enable Storage Spaces.
B.    Configure settings to save copies of files daily.
C.    Turn on File History.
D.    Configure Windows 7 File Recovery.

Answer: BC

Choose Lead2pass you will get:

Most updated collection of Microsoft 70-687 Exam Questions;
Prepare according to the latest Microsoft 70-687 Exam Syllabus;
Product is instantly available for download and use;
24×7 Customer Support on case of problemwith the product.

http://www.lead2pass.com/70-687.html